Projects-2
Meet Bobby Cole and his pet projects truck. This is a very hot 1949 Chevy which has been completely restored and modified. We ceramic coated the headers for this project and he told us he has another one in progress so look for an update on this builder.
This is a 4 wheeler frame in the raw. This is after degreasing and blasting. All of the parts frame, A-arms, swing arm and handle bar.
These are the parts after coating, The frame is a two part, candy blue over a Carolina blue base coat. The other parts are durable wet white.
Hydro blasting is stripping all of the old powder coating as shown left and below
below showing coated with our durable wet black finish
below showing the grill stretch wrapped and ready to be picked up and rienstalled on this customers F-250 4x4 Quad cab truck
This is a 1964 TR-6 full chassis, left shown plugging holes after being hung for coating, right is the chassis after coating with our durable wet black finish.
This is a set of 300o GT V-6 headers and cross over ceramic coated with Satin black.
From This
(See more on this projects progression in our Race Car section)
To This, coated with Chevrolet Competition Orange, We will keep track of this project and post a completed set soon.
From This in the raw, a Hardtop with a standard anodized finish prior to blasting and coating.
To This, coated with Our Durable Wet White finish.
Most regular powders are good for 1000 hrs of direct salt water contact, this powder is good for 3000 hrs.
We spend the extra money to ensure our customers a long lasting, durable finish.
Custom built Harley Davidson Soft Tail frame for a bike shop in the Greenville area. The frame was built by Custom Fabrication out of Kernersville North Carolina.
Now the frame is coated and ready for this bike builder to finish his assembly. This is our Sherwin Williams Satin Black finish.
These are Chevrolet Impala wheels with our Wet Black finish.
After coating with Sherwin Williams High Gloss White, ready to be delivered.
1998 Terra Spreader Wheels. before. This is 1,000 pounds of rusty (but very salvagable) rims, retainer rings and bead rings.
We coat parts of all shapes and sizes.
From a damaged finish on this part, degreasing, media blasting and coating. Now this looks nice on this customers sharp looking bike.
Honda brake rotors, now with this coating, they will never show rust again.
Coated on both
sides.
From a raw finish straight from the manufacturer, this BMX frame has a nice Satin Black finish & is ready to be reassembled.
A great part of what we do is restore old or damaged parts for people. These are exterior light frames that go to a church in the Blounts Creek area. They were installed years ago and suffer from moisture & water damage. After stripping and re-coating, they are good for another 20 years.
This wheel looks good but there is some damage to the chrome, the original finish is beginning to break down and needs a face lift. Shown right is the same wheel with our wet black finish. Reinstalled this will be maintenance free for many years to come and will not lose it's finish.
Shown left is blasted, right is coated. Locally manufactured small outboard motor mounts for creek boats. We coated this with our Durable White finish.
These are from a local manufacturer, the large box and lid has a Sherwin Williams Gray Textured finish and the two small ones have a Tiger Dylac Caution Yellow finish.
Polishing another set of race car headers. The Ceramic Chrome is actualy a glass powder mixed with aluminum spheres in a thick emulsion. Sprayed on it is green, baked to cure and it turns gray. Sanding will remove the scale and show the base which is now aluminum, shown above is hand polishing with steel wool and header high temp polish.
Shown another set of Funny Car Zoomies with a Satin finish Ceramic coating.
These were polished aluminum. When installed on a high performance engine they require a lot of maintenance keeping their look. The coating above is Chrome powder with a 65% clear coat top coat. Now this finish will require very little cleaning to stay just as it is. If you don't like the high silvery look that chrome powder displays then a simple polished and top clear coated finish may be just what you want.
From the shelf through our blaster and coated with our Black textured finish.
Now this sheet metal intake and intake tube are ready to be installed on this customers car. We will be posting an open hood shot after it's been installed.
This is a matching set of (front / rear) Harley wheels. They will give this customer a unique look on his bike. Bike pictures are shown on our motorcycle section under our customer projects section.
