Commercial / Industrial Projects
Cherry Coating powder coats roof flashing's for commercial roofing contractors. We have powders to match the MBCI building color codes
We coat all types of aluminum extrusions.
These extrusions are edge moldings, loaded for delivery
Advertising vertical shelf wall mounting supports for Hibbit Sports, coated with RAL 1051 colored powder.
  Extrusions which are trolly    assemblies,         waiting for            delivery
Wildlife floating dock handrails     coated with Caution Yellow
  RAL powder
The masking off of RF contact areas is by Teflon tape and aluminum foil for non coated areas. These are  pretty large boxes that hold this equipment.
Powder Coated    parts boxed          & awaiting           delivery
  Electronic DSL lock down boxes      coated with       texture powder awaiting final part     QC prior to        packaging and         delivery
  to ECU in the      Greenville area.

Cherry Coating is accepted by the NC Powder Coaters Association and is dedicated to                            each customer’s lead times and coating requirements

Bach oven sizes are :

    1 - 4.5 ft wide x 4.5 ft deep x 7.5 ft long horizontal  ( gas fired 1,500 degs-250k BTU).
    2 - 3 ft high x 4 ft deep x 8 ft long horizontal  ( gas fired 800 degs-250k BTU).
    3 - 8 ft tall x 10 ft wide x 20 ft deep floor model ( gas fired 500 degs-1,000,000 BTU).

Each oven is sized to accommodate parts by quantity, size and various weights. Heavy rolling racks and hardened steel hooks (from 1/16”@200 lbs to 1/2” dia.@1,200 lbs & 5,000 lb chains) are used to suspend parts for the coating process. We use high temp silicone rubber plugs for threaded holes and Teflon tape to mask unpainted areas or external threaded parts or bearing and contact areas.

2. Reliable manufacturers of: RAL colors, Hybrid, Urethane, TGIC polyester and                    FDA-Approved powders purchased in 35 to 55 lb. boxes are: Sherwin Williams,
   NICIndustries, Govesan & Tiger-Drylac and Powder by the pound for prototype size           quantities.

3. We use Gema box feed powder flocking guns to apply all powders, our KV or static           settings for powder application is 45k to 60k unless otherwise instructed by our powder      manufacturers.

4. Each color in our shop owns it's own application hose to prevent cross contamination of      coatings

5. Cherry Coating offers pick up and delivery services.

------------------------------------------ Our Capabilities -------------------------------------------------
Our Commercial / Industrial side is limited from our region. We have the capacity and are ready to discover new clients and discuss their coating requirements.
Electronic enclosures for RF shielding, used in communications, medical, and other radio frequency interference sensitive
Click here to add text.
This is a very high tech group
        in the Greenville area. These were shipped to Taiwan.
Cherry Coating was part of and just finished a ( 100 year old Union Station ) train station restoration in New Bern, NC for a NC based construction company, 700 misc brackets, 500 feet of gutters and 300 feet of downspouts. All parts were delivered and the project was completed satisfactorily.