Cherry Custom Powder Coating offers our customers:
The highest quality baked on coatings available in the industry today. It's cheaper to restore finishes in some cases than it is to replace the parts.  Our process is proven, let us show you how it can work on your parts.
Cherry  Custom Powder Coating
Washington, NC
Phone: 252-402-8366
CARS / TRUCKS
MOTORCYCLES
HIGH TEMP CERAMIC
MARINE
HOME & GARDEN
Our powder coated finishes flow and look like wet paint. Nothing could make your parts look any better than a flat, smooth finish like above. There are cheap powders on the market but we decided to spend a little more and go with the best, they give                             us the long lasting finishes our customers love.
Cherry Coating:
Is accepted by the NC Powder Coaters Association and dedicated to each customer’s lead times & coating requirements.

Bach oven sizes are :

        1 - 4.5 ft wide x 4.5 ft deep x 7.5 ft long horizontal  ( gas fired 250k BTU).

        2 - 3 ft high x 4 ft deep x 8 ft long horizontal  ( gas fired 250k BTU).

        3 - 8 ft tall x 10 ft wide x 20 ft deep floor model ( gas fired 1,000,000 BTU).

1. Each oven is sized to accommodate parts by quantity, size and various weights. Heavy rolling racks and hardened steel hooks (from 1/16”@200 lbs to 1/2” dia.@1,200 lbs & 5,000 lb chains) are used to suspend parts for the coating process. We use high temp silicone rubber plugs for threaded holes and Teflon tape to mask unpainted areas or external threaded parts or bearing and contact areas.
2. Reliable manufacturers of: RAL colors, Hybrid, Urethane, TGIC polyester and  FDA-Approved powders purchased in 35 to 55 lb. boxes are: Sherwin Williams, NIC Industries, Govesan, Tiger-Drylac and Powder by the pound for prototype size quantities.
    ( Wet black )         ( Candy Purple )       ( Apple Spice )           (High Silver)
     Links to powder color charts and their manufacturers

   Having trouble finding color charts, give us a call and we will walk you through the process.
    Each powder manufacturer offers over 8,000 colors and textures. Listed                below are delivery and min powder orders. We stock over 50 colors.

      Company                    delivery              minimum order
   Powder by the pound                    2 days                                   2 lb min.
   Prismatic (NIC)                               5-8 days                               2 lb min.
   Sherwin Williams                          1-5 days                              50 lb min.
   Tiger Drylac                                      3 days                          55 or 5 lb mini pack
    See Larry in our Cars
         & Trucks section
    See  Kevin in our Car
        & trucks section
See Dave in our Cars &         trucks section

More Wake Med parts.
We coat allot of swing arms, each make requires masking in different areas for bearings, seals and slides to work properly. (this is an Adams built arm)
This swing arm is a 240 set for a bike builder in Greenvillecoated in our Matte Black finish.
Along with bike wheels, we coat allot of rotors like this. This prevents rust from showing.
These are front porch Cast Iron trim pieces. This project also has 9 foot tall roof supports of the same design, coated in our Satin Finish.
For out of this world finishes at an affordable price, give us and call.